IR TV

Hottel.io 5 star Hospitality In-Room TV SystemHottel.io is an innovative TV system that combines customer requirements with Hotel services by ordering directly on TV.

-TV Keys (Power, V+, V-, Mute, Input)

A) [Input] : IR TV codes only

B) [V+], [V-], [Mute]

- If TV is not set-up by the user, these keys send STB codes only.

- Once the TV is set-up by the user, these keys send IR TV codes only.

C) [Power]

- If TV is not set-up by the user, these keys send STB codes only.

- Once the TV is set-up by the user, these keys send IR TV codes and STB codes.

- TV programming modes

- With a TOP 10 brand number

A) The following TV brands are pre-programmed on 10 digit keys (1 ~ 0):

1

2

6

7

3

8

4

9

5

0

B) Press and hold the [>>] + [OK] keys for 3 seconds. LED indicator turns ON to confirm

that the remote control has entered the TV programming mode.

Note : If no key press within 30 seconds, or if [BACK] key is pressed, LED indicator blinks

2 times and the remote control exits the TV programming mode.

C) Press and release a digit key (1 ~ 0) to select the TV brand. LED indicator turns OFF on first key press for brand selection.

D) Option 1 : Press & Release

Once a digit key has been pressed and released, the remote control sends the [VOL+] IR TV

code.

If the right IR code is sent then the volume icon is displayed on the TV screen.
If the volume icon is not displayed on the TV screen, press and release the digit key again to send the next [VOL+] IR TV code. Repeat until the volume icon is displayed on the TV screen. The LED indicator blinks on each key press.
Once the volume icon is displayed on the screen, press [OK] key to confirm. The LED indicator blinks twice and the remote control exits the TV programming mode.

Note : Once the last [VOL+] IR TV code, of the selected TV brand, has been sent, LED

indicator blinks 3 times and the first [VOL+] IR TV code is sent again The whole

process restart from d).

E) Option 2 : Press & Hold

Once a digit key has been pressed and released, the remote control sends the [VOL+] IR TV

code.

If the right IR code is sent then the volume icon is displayed on the TV screen.
If the volume icon is not displayed on the TV screen, press and hold the digit key until the volume icon is displayed on the TV screen. A next [VOL+] IR TV code is sent every 2 seconds and the LED indicator blinks 1 time, each time a new IR code is sent.
Once the volume icon is displayed on the screen, press [OK] key to confirm. The LED indicator blinks twice and the remote control exits the TV programming mode.

Note : Once the last [VOL+] IR TV code, of the selected TV brand, has been sent, LED

indicator blinks 3 times and the first [VOL+] IR TV code is sent again The whole

process restart from e).

- Manual mode by entering a 4 digit code from the TV codes list

A) Locate the Brand of your television in the TV code list. Make note of the 4 digit code.

B) Press and hold the [<<] + [OK] keys for 3 seconds. LED indicator turns ON to confirm that the remote control has entered the TV programming mode.

C) Enter the 4 digit code you found in the TV code list by using the numeric keys. LED

indicator turns OFF at each key press.

D) Once the 4 digit code has been entered, the LED blinks 2 times and the remote control sends the corresponding [VOL+] IR TV code.

E) Check that the Volume icon is displayed on the TV screen and press [OK] key to confirm.

The LED blinks 2 times and the remote control exits the TV programming mode.

- Query mode (read the programmed TV brand code)

A) Press and hold the [Play/Pause] + [OK] keys for 3 seconds. LED indicator turns ON to

confirm that the remote control has entered the Query mode.

Note : If no key press within 30 seconds, or if [BACK] key is pressed, LED indicator blinks

2 times and the remote control exits the Query mode.

B) Press [Info] key, LED indicator blinks to indicate the TV brand code number.

If TV 083 TV brand code number is set, 10 times blink - Pause - 8 times blink - Pause - 3 times blink. It must be correct when the LED indicator blinks.

Note : The LED blinks 10 times for “0”.

- TV Code Reset

A) Press [OK] and [Input] keys for longer than 4 seconds. LED indicator turns ON to

confirm that the remote control has started the TV code reset.

B) The remote control blinks 3 times to confirm that it is deleting the existing TV codes table.

C) When TV code reset is completed, LED indicator goes OFF.

- Hidden Command

Press '0' seven times to open "Settings".

- Launcher

CONTACT US

Personalize your guest TV background images, themes, and more to reflect your hotel brand and personality. Build trust relations with guests and they will return to your hotel.